Things you definitely must know for installing propane gas tank

The first and foremost thing before installing a propane gas tank is to determine whether the gas cylinder is leaking or not. Why? Because the indicated gas leaks when connected to a stove that is on, it will cause a fire. Place the gas cylinder away from open flames including cigarettes and make sure the gas hose is not crushed by other heavy items. The way to see whether the gas cylinder is leaking or not is to give soapy water to the neck of the tank if there is a bubble it means there is a leak. In the meantime, you may also need to check out the recommended propane gas companies near me.

Make sure the stove is off

The second is to make sure the stove is off, too. The dead stove will cut the flow of gas from the tank to the stove. So, minimize the occurrence of fires later.

Check the Rubber Seal

Make sure the rubber seal on the tank neck is still flexible, smooth and not easily torn and in accordance with the diameter of the gas cylinder neck. In addition, make sure that the rubber seal is installed properly because the function of the rubber seal is to hold the pressure of the needle on the regulator.

A good rubber seal will certainly be able to hold the needle from the regulator properly so there is no leak.

Install the Regulator Correctly

The next way to install a gas cylinder is to install the gas regulator correctly. After checking the rubber seal, this is the time the regulator is ready to be installed. Install the regulator in a position perpendicular to the tank neck. Pressure is needed, such as when installing an electric cable, so that the regulator needle really sticks to the neck of the tank. After feeling right, then turn the regulator lock clockwise with the position 180 degrees.

Leave a Reply

Your email address will not be published. Required fields are marked *